Simple Guide to Installing a New Shower Unit

Simple Guide to Installing a New Shower Unit

Blog Article

Call Us Now

What are your thoughts on How to Install a Direct-to-Stud Shower Enclosure?

An effective shower installment requires careful planning as well as a great deal of job. In many cases, you will certainly require to do three kinds of tasks: mounting wall surfaces, mounting the plumbing, as well as finishing walls.

Prep work

First of all, you need to pick the type of shower that you want to mount. It is very important to establish whether the chosen shower is capable of handling certain systems as well as can manage a safe level of water with the boiler. The majority of shower units nowadays are developed to be adaptable to different water pressures (such as stored hot water and cold mains).
It is also important to take into account the water pressure and the planning of the piping and also water drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower device can be linked to the bath faucet based on your demand, and the water temperature level can be changed via the faucets. Push-on mixers are cheap and exceptionally basic to install. Nonetheless, although the hose pipe link is easy, it is conveniently dislodged. Furthermore, it is inconvenient to change the temperature level.

Bath/Shower Mixer: The hose pipe and spray of this sort of shower are incorporated with a bathroom mixer tap, and also the temperature level can be adjusted via the bath taps. It is a really affordable option and no additional plumbing is entailed. However, the bath/shower mixers likewise deal with inconvenient temperature control options.

Manual Mixer: The hose pipe and spray of a manual mixer shower unit are a part of the wall surface system as well as the hot and cold water materials are connected to a single shutoff The temperature level as well as stress of the water are managed with either one or a variety of handles (in a lot more costly showers). Although temperature control is a lot easier in manual mixer kinds, they are more pricey than the previously mentioned mixers. They likewise need added plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The pipe and spray of this shower type belong of the wall device and the hot and cold water products are attached to a solitary valve here as well. It is complete with an integrated stabiliser to self-adjust the water temperature and also to avoid it from becoming too warm. One of the biggest benefits of a thermostatic mixer shower kind includes practical temperature control. However, it is the most costly of the various mixer choices.

Power Shower: A power shower is a solitary device containing a powerful electrical pump that can modifying both the water stress as well as temperature level. This kind of shower can be fitted if there is supply of water from a cold water cistern and also a warm water cylinder. A power shower makes the adjustment of both pressure and also temperature easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is supplied by a combination central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a keys cold water supply as well as it heats the water electrically. It is necessary to note that for this shower type to be set up, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The system allows the temperature and also pressure to be changed by means of a knob. Versions with temperature stabilisers are better as they stay untouched by various other taps somewhere else being used within the house. A significant disadvantage of electrical showers is that the control knob just allows for the choice of high temperatures at less pressure, or reduced temperatures at a higher pressure. This is troublesome in the winter when the spray is often weak and the mains water is cooler. Nonetheless, this trouble is dealt with in some designs which are offered with a winter/summer setting.

Method

Depending on the sort of shower you want to set up, the shower head must either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it must have a check shutoff.
Before starting, it is suggested to mark the settings of the shower head and control, and also to plan the pipe-work entailed. Furthermore, the water drainage system to eliminate the drainage will require to be planned. Both positions of the wire path and the shower button will certainly likewise need to be thought about if an instant or electrical shower system is being installed.
Use the guideline overview supplied with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is essential to cut off the supply of water. In order to protect the pipelines, they ought to be offered a water resistant covering and additionally fitted with isolating valves. The pipelines can after that be buried right into the wall surface and also smudged over to neaten the overall look.
Fit the base tray, shower head, as well as fittings.
Connect the major shower control to the pipelines that will be supplying the water (This might need a female screw thread adapter).
Reconnect the water supply and also examination the pipes for any kind of leaks, as some may require tightening.
If you are setting up an electrical shower, bear in mind to switch off the electricity supply prior to making any electrical links. Once these connections have actually been made (there should be support within the user's manual), the power supply can be switched back on.

Changing Water Pressure to Match Your Shower

The cold water reservoir can be lifted to a better height (occasionally just 150mm (6inches)) by fitting a solid wooden assistance underneath it - potentially made up of struts and blockboards. If you select this alternative, the main as well as distribution pipelines will certainly likewise need to be raised to fulfill the new height of the tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it should be connected right into the power supply in order to operate.

Piping and also Drainage

It is best to make use of 15mm diameter supply pipes, as well as make the go to the shower as short and straight as feasible so regarding preserve maximum stress as well as minimise heat loss. Furthermore, by reducing the use of joints for pipeline corners, you can reduce the resistance in the circulation of the supply of water. You can achieve this by flexing the pipelines instead.

Most Usual Errors

Breaching or ignoring local code restrictions.

Using pipes that are as well tiny.

Attaching copper to galvanized without using a brass or dielectric fitting in between both.

Not utilizing tape or pipe compound at threaded joints.

Uneven your components when installing them.

Not installing an air gap filling for fixtures.

Cutting supply stub outs too short to set up the shutoff valves onto after the finished wall remains in location.

Not appropriately aligning tubes right into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will cause a leak.).

When transforming the water back on in your house, always run the outside hose shutoff or purge your bathrooms to bleed dirt and also air from the lines. This debris can cause troubles in your sink taps as well as various other plumbing trim.

How Do You Install a Shower? Follow This Guide

Installing a Shower at a Glance

Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit

Step 1: Drill pilot holes

Step 2: Prep fixture holes

Step 3: Move unit into place

Step 4: Caulk corners and base

Step 5: Attach door

Step 6: Install shower pan

Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.

Can I Install a Shower Myself?

Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.

Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.

Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.

Tools and Materials

2- to 4-foot level

Electric drill with a 1/8-inch drill bit

Caulk

2-inch hole saw

Cedar shims

The unit itself

Before You Begin: Prep the Space

It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.

Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.

If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.

If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.

https://www.homeserve.com/en-us/blog/how-to/install-shower/

Do you appreciate reading up on How to Build a Shower Enclosure for Your DIY Bathroom? Put a remark directly below. We would be glad to hear your thinking about this blog. Hoping that you visit us again soon. Liked our blog entry? Please share it. Help another person find it. Thanks for taking the time to read it.

More Details

Report this page